网站首页 | 公司简介 | 产品中心 | 荣誉资质 | 销售网络 | 新闻动态 | 技术信息 | 联系我们  
  沥青玛蹄脂
  阻燃玛蹄脂
  沥青胶泥
  沥青路面养护剂
  FYT-1道桥防水涂料
  聚氯乙烯胶泥
  沥青胶
  导热胶泥
  特种防腐涂料
  环氧沥青
  环氧树脂胶泥
  冷底子油
  氰凝防水防腐涂料
  FG深冷粘结剂
  玛蹄脂纤维布
  CPU聚氨酯阻燃防水卷材
· 玛蹄脂美国宣布豁免...2020-3-7
· 沥青胶泥特朗普称若...2019-6-8
· 离岸人民币收复6....2018-10-4
· 沥青玛蹄脂厦门楼市...2018-8-13
· 沥青胶泥国家医保局...2018-8-6
· 沥青胶泥中国“洋垃...2018-5-5
· 沥青胶泥热点城市住...2017-11-27
· 成品油价格开启疯涨...2017-11-8
河间市五湖防水材料厂
手机:139 3073 5970   
   139 3072 1858
联系人:张经理
电话:0317-3181828
传真:0317-3181828
邮箱:1305702851@qq.com
邮编:062454
地址:河北省河间市米各庄工业园区88号
 

 

   --TN-1粘结剂  

TN-1粘结剂

TN-1粘结剂

产品介绍/Product introduction

 TN-1粘结剂系特殊单组份、无溶剂型聚氨酯瓦克粘结剂,基本成份为聚醚、添加料、阻燃剂、助剂等。无刺激性气味,可室温施工。涂刷和喷涂均很方便,适用时间长。粘结后可在常温下自然固化。固化后,粘结剂不溶,防水性能。可用于泡沫玻璃、聚异氰脲酸酯及聚氨酯的保冷粘结。

       TN-1 adhesive is a polyurethane adhesive with special single component and non-solvent. Its basic elements are polyether, added material, flame retardants, and accessory ingredients, etc. It has no irritable smells or toxicity, and can be constructed at normal temperature. It is convenient for smearing and sputtering and has long application span. It solidifies naturally at normal temperature after adhesion, and the adhesive won’t be dissolved after solidification and has excellent waterproofing property. It is generally used as the adhesive for cold insulations, such as cellular glass, PIR-polyisocyanurate and polyurethane, etc..

 

产品特性/Product Property

1、外观:浅黄褐色粘稠液

2、密度:1100~1200kg/m3

3、粘度:3000~20000厘泊

4、PH值:6~8

5、粘结强度:压剪强度:≥2Mpa

6、使用温度:-196~+250℃

1. Appearance:Viscid liquid with the color of pale yellow or brown

2. Density: 1100~1200kg/m3

3. Viscosity: 3000~20000 centipoises

4. PH Value: 6~8

5. Adhesive Strength: compressive shearing strength: ≥2Mpa

6. Service Temperature: -196~+250℃

 

使用方法/Usage

1、表面处理:应先清除粘结面上的油污或灰尘。

2、涂胶:采用单面上胶法,用锯齿式刮刀或喷涂设备将胶液均匀地涂布在基面上。

3、贴合:将待粘材料,铺放在涂胶的基面上,粘贴后可不加压,若稍许加压效果更好。

4、固化:在25℃,RH为100%(湿度),在4小时内即可达到粘结强度,以特殊加工后,冬天也能达到同样效果,常温下24至48小时即可使用。

1、Surface treatment: Removing the oil stains or dust on the face before bonding.

2、Smearing: Single face smearing, use a toothed scrapper or spraying equipment to homogeneously apply it onto the base.

3、Bonding: Put the material to be bonded onto the base with the adhesive. A little pressure will increase the adhesive effect.

4、Curing: Adhesive strength can be reached after 4 hours at 25℃,RH 100%. After special processing, the same effect can be reached even in winter. Under normal temperature, usage is allowed after 24~48 hours.

友情链接:沥青玛蹄脂 沥青胶泥 氰凝防水防腐涂料 改性沥青防水涂料 FYT-1道桥防水涂料 阻燃玛蹄脂 氰凝防水涂料 玛蹄脂纤维布 S-60沥青胶

版权所有© 河间市五湖防水材料厂 Copyright©2019http://www.whfs68.com 设为首页 | 加入收藏 | 网站地图
地址:河北省河间市米各庄工业园区88号
电话:0317-5581860 传真:0317-5581860 手机:13930735970 13930721858 联系人:张经理 备案号:冀ICP备20020045号-2
邮箱:1305702851@qq.com 邮编:062454 沧州新星传媒独家提供网络支持